Mobile scissor lifts require annual Thorough Examination under the HSE LOLER regulations. Any equipment that lifts more than 300mm from ground level, requires a Thorough Examination under LOLER. The annual requirement is for equipment operating in clean and dry conditions. If they are working in more extreme conditions the inspection intervals must be reduced. If the unit is repaired following an accident, a new certificate must be obtained. A mobile scissor lift is designed to raise objects above 300mm which increases the risk of injury from mechanical failure.
Essentials
The examination will be undertaken on your work premises. A clear area with good lighting is essential.
Thorough Examination
The engineer will start by examining the mobile scissor lift in detail, ensuring that all functions are working correctly. The hydraulic system will be checked for leaks. Welds will inspected for cracks and the table examined to ensure that that it’s not twisted. Wheels, axles and brakes must be in good condition. Labels including CE marking or UKCA marking and the SWL on the data plate will be checked. Any faults will be recorded and a time stipulated for the repairs to be carried out. More serious faults may mean the equipment is withdrawn from use until repaired.
Service and Repairs
Assuming that there are no serious faults, the engineer will then service the equipment and undertake any minor repairs or adjustments. If additional costs are to be incurred, you will be asked to authorise the work before he proceeds.
Report of Thorough Examination
When the engineers paperwork is received back at the office, a Report of Thorough Examination (RTE) will be prepared. This confirms that the equipment was left in safe working order. It may also be required by another company if the equipment is to be used on their premises. It is an important document and should be filed safely.
